The MKS sealing fitting is designed to securely anchor your kennel to the ground. Once sealed, it offers lasting resistance, suitable for all types of dogs.
It is recommended to use these sealing fittings when the kennel is installed on soft ground with foundation pads. Fixed to the lower part of the frame with a self-drilling screw, it allows the kennel to be anchored to the ground and prevents any movement, especially in strong winds.
Technical Characteristics
- Material : Hot-dip galvanized flat steel 30 x 3 mm
- Length : 40 cm
Installation Recommendations
For an installation offering maximum security, we recommend the following quantities of fittings based on kennel size:
- 2 x 2 m Kennel : 4 fittings
- 3 x 2 m Kennel : 4 fittings
- 4 x 2 m Kennel : 6 fittings
- 5 x 2 m Kennel : 6 fittings
- 6 x 2 m Kennel : 8 fittings
Installation Tips
At the location of each fitting, a hole should be dug in the ground (approximately 20/30 x 20/30 cm, depth approximately 50 cm) (equivalent to about one spade's width and depth).
Screw the fitting onto the lower bar of the kennel frame, positioning the long part into the hole. Then pour concrete into the hole so that the bar is firmly set. Allow to dry for a few hours to a few days, depending on weather conditions.
To simplify installation, we recommend using ready-mix concrete, available in bags at DIY stores. Simply add water according to the instructions on the packaging.
